New Zealand orders:                                                  Back to homepage

3-4S Lipoly (9.5 – 13.5v).  

Adjustable alarm for Trex450 sized helis or aircraft.    4 x 10mm ultrabright 60,000mcd LEDS mounted on a fiberglass plate.  Perfect for 3 & 4S planes and helis.  This unit fits well in the floor of a fuselage.  These alarms come preset to 10v unless you request otherwise.  Cost $35  code: NZ3-4L  Order

 3-4S Lipoly (9.5 – 13.5v).  

Adjustable alarm for Trex450 sized helis or aircraft.  This alarm uses a 93dB 3.3Khz piezo.  Perfect for the smaller heli - they are also light at 8g.  These alarms come preset to 10v unless you request otherwise.  Cost $30  code: 3-4P  Order

 3-4S Lipoly (9.5 – 13.5v).  

Adjustable alarm for Trex450/Quick EP8 sized helis.  This alarm uses a 93dB 3.3Khz  and an 86dB 2.3Khz piezo.  This produces a dual tone that is iritating!!!  These alarms come preset to 10v unless you request otherwise.   Cost $35  code: 3-4DP  Order

5-7S Lipoly (16.5-26v)Designed for the Trex600.  They also fit a wide range of planes and helis.

Adjustable alarm with 6 x 10mm ultrabright 60,000mcd LEDS on a fiberglass panel.    Cost  $50   code: 5-7L  Order 

8-10S Lipoly (27-36v)

The alarm voltage limit is adjustable with a  trim pot, by the wire exit. Line up the marks for 27 to 36v  as desired.  Unless requested at ordering, the alarm is set to 33.0v.  Cost $60   code: 8-10L Order